Filters
Use of Rainwater Harvesting from Roofs for Irrigation Purposes in Hydroponic Greenhouse Enterprises
This study was conducted to determine the irrigation water demand due to solar radiation in high-tech greenhouses using hydroponic systems in Turkey’s Mediterranean and continental climates, and to determine the annual water consumption and storage capacity with harvested rainwater. Intensive greenhouse cultivation and the recent increase in modern greenhouse cultivation were important factors in selecting the provinces for the study. The chosen provinces were Antalya and Adana, with a Mediterranean climate, and Afyonkarahisar and Kırşehir, with a continental climate. In this research, depending on the production period, the amount of water consumed per unit of area in greenhouses in Antalya, which has a Mediterranean climate, was determined to be 1173.52 L m−2 per yr−1, and in Adana, it was 1109.18 L m−2 per yr−1. In the provinces of Afyonkarahisar and Kırşehir, where a continental climate prevails, water consumption was calculated to be 1479.11 L m−2 per yr−1 and 1370.77 L m−2 per yr−1, respectively. Storage volumes for the provinces of Antalya, Adana, Afyonkarahisar and Kırşehir were found to be 438.39 L m−2, 122.71 L m−2, 42.12 L m−2 and 43.65 L m−2, respectively. For the provinces of Antalya, Adana, Afyonkarahisar and Kırşehir, the rates of rainwater harvesting and meeting plants’ water consumption were calculated to be 80.79%, 54.27%, 27.47% and 25.16%, respectively. In addition, the amount of water fee savings that could be achieved by rainwater harvesting was calculated to be USD 901.3 per yr−1 for Antalya, USD 835.3 per yr−1 for Adana, USD 247.6 per yr−1 for Afyonkarahisar and USD 210.2 per yr−1 for Kırşehir. As a result, rainwater harvesting will not only provide economic gain to enterprises but will also be important in reducing the negative effects of irregular rainfall regimes caused by climate change on underground and surface water resources. It was also concluded that enterprises should focus on popularizing rainwater harvesting.
Evolution of Energy Efficiency of Buildings Using the Guidelines of the European Green Deal Plan
In contemporary literature, there are not many analyses taking into account changing heat transfer coefficients over the years and examining and comparing the variability of insulation thickness in different thermal standards. The article presents the evolution of energy demand taking into account the requirements of the Green Deal. The analysis was carried out using two materials, showing how their thickness changed in relation to the evolving energy requirements. The research was illustrated with an example of thermal modernization for a building in specific time periods. The analysis was carried out using a numerical program, comparing warming variants for individual years using the Index of annual primary energy demand. Following the requirements contained in the EPDB directive, a comprehensive reduction of the penetration coefficients for building partitions was proposed and requirements for the mandatory use of mechanical ventilation and photovoltaics were introduced.
Influence of Starch Admixtures and Silver Colloids Stabilised with Starch Hydrolysates on the Course of Electrochemical Potential Difference of Reinforcing Steel in High-chloride Environment
The purpose of the conducted study was to verify whether the use of concrete admixtures with modified starches and starches modified with stabilised silver colloids affects the course of electrochemical potential difference, and hence corrosion, of reinforcing steel in a chloride environment. In the tests, cross-linked starches and products of acid hydrolysis of starch (dextrins) were used as admixtures. The 1-molar aqueous solution of sodium chloride was used as an aggressive environment. The tests consisted of measuring the potential difference generated in the reinforcement corrosion cell on the surface for a period of 60 days and then assessing the risk of corrosion. The effect of the addition of starch derivatives on the properties of cement paste was investigated through a one-way ANOVA analysis of variance followed by post hoc tests. The test results showed that the use of concrete admixtures with cross-linked starches positively affects the passivation of the steel. The likelihood of reinforcing steel corrosion when using distarch phosphate, acetylated distarch phosphate and acetylated distarch adipate admixtures is less than 5%. The results obtained showed an improved effect on the passivation of reinforcing steel in cement composites. Additionally, concrete samples may have microbicidal properties.
Artificial Neural Network Model for Predicting Carrot Root Yield Loss in Relation to Mechanical Heading
Yields and Bioactive Substances of Selected European Asparagus Cultivars Grown for Green Spear Production as Influenced by of Post-Harvest Drip Irrigation on Sandy Soil in Central Poland
The effects of high temperature and low humidity on crop water stress index of seed pumpkin plants (Cucurbita pepo L.) in semi-arid climate conditions
This study aimed to evaluate the effects of high temperature and low humidity on the crop water stress index (CWSI) of seed pumpkin plants grown under semi-arid climate conditions to determine the optimum irrigation time. This research unveils the critical impact of high temperature and low humidity on seed pumpkin growth, emphasizing the vital role of the CWSI in optimizing irrigation strategies and seed yield. Moreover, the relationship between CWSI, physiological parameters, and seed yield of the pumpkin was investigated. The mean CWSI values in the I70 (0.40) and I35 (0.56) treatments were 42% and 100% higher, respectively than those in the full irrigation (I100) treatment (0.28). While the I70 treatment showed manageable water stress with minimal impact, the I35 treatment experienced severe stress, significantly reducing crop growth and yield. The mean seed yield (SY) in the I70 treatment increased to 1245.2 kg ha–1 compared to I35 (903.3 kg ha–1) but remained lower than I100 (1339.3 kg ha–1). The CWSI had negative correlations (p ≤ 0.01) with seed yield, chlorophyll content, and leaf area index, while it had positive correlations with water use efficiency and irrigation water use efficiency (p ≤ 0.01). This study showed that pumpkins could be grown successfully at 30% water deficit conditions, and a water deficit higher than 30% may cause a significant seed yield loss in semi-arid climate conditions. In addition, the results highlight the importance of optimal irrigation and CWSI monitoring for informed irrigation decisions and sustainable agricultural practices. Therefore, moderate water deficit (I70) can be adopted in pumpkin cultivation as an alternative to full irrigation.
Long-term agricultural reclamation on the chemical properties of Technosols at lignite postmining site – efficiency of winter wheat and winter rape
Concentration of metals and metalloids in livers of birds of various foraging guilds collected during the autumn migration period in Poland
Factors affecting the concentration of metals and metalloids in the kidneys of a top predator, the Eurasian Buzzard (Buteo buteo) wintering in farmland in Poland
AbstractDuring late autumn and winter, raptors in the western Palearctic face challenges due to food scarcity and dropping temperatures. That time they can be exposed to various elements including toxic ones ingested with food. Kidney samples from 22 females and 19 males of a medium-sized raptor, the Common Buzzard Buteo buteo found dead in farmland of Eastern Poland in winter were analyzed for a concentration of 21 elements. Elemental concentrations were analyzed regarding the age and sex of birds. Results revealed that only 4.9% of individuals had kidney lead levels exceeding 8.0 mg, while 9.8% showed cadmium levels above 8.0 mg/kg, indicating potential poisoning. The study also highlighted the limited entry of arsenic into agricultural ecosystems exploited by Common Buzzards. Sex differences were noted, with females accumulating more lead and vanadium than males which can be associated with foraging niche partitioning between sexes driven by body size dimorphism. Sulfur showed complex interactions with cadmium, mercury, and zinc, with a positive correlation between sulfur and zinc levels in the kidneys, emphasizing dietary needs during food scarcity. A positive correlation was found between zinc and lead concentrations, indicating zinc’s role in mitigating lead’s impact. The study also revealed positive correlations between selenium and highly toxic elements like mercury (Spearman correlation, rs = 0.41) and cadmium (rs = 0.51), suggesting a mitigating effect of selenium on exposure to heavy metals. This study enhances understanding of year-round environmental contamination exposure for raptors and sheds light on bioaccumulation in a top predator.
Discovering the ecological structure of different macrophyte groups in rivers using non-parametric and parametric multivariate ordination techniques
AbstractThis paper analyses various methods of ecological ordering that are often used in modelling the relationship between vegetation and habitat. The results of direct gradient ordination by Canonical correspondence analysis (CCA), which is based on correlation, were compared with Non-metric multidimensional scaling (NMDS), which is based on rank analyses. Both tools were also compared with Detrended correspondence analysis (DCA), which is a popular indirect gradient analysis method. The macrophyte assessment was conducted at 98 river locations in the lowland regions of Poland. Each of the surveyed locations falls within a consistent abiotic category: small to medium-sized lowland rivers with a sandy bottom. Habitat elements analysed included limnological variables and geographic parameters, and the botanical survey focused on submerged macrophytes, including vascular plants, as well as bryophytes and algae. Firstly, it was shown that various analytical tools for determining the importance of ecological factors (Monte Carlo test, BIOENV) identify slightly different significant factors responsible for the development of macrophytes in rivers. Secondly, considerable similarity was found in the structure of macrophyte communities generated on NMDS and DCA biplots, while macrophyte communities were presented very differently based on CCA. Thirdly, the ecological preferences of aquatic plants based on one-dimensional analyses primarily reflected the results of CCA, whereas they did not always follow the ecological pattern revealed by NMDS. Finally, by conducting separate studies for non-vascular plants and vascular macrophytes, it was confirmed that different ecological drivers are responsible for the development of particular groups of macrophytes
Preparation of the Digital Elevation Model using open source Geographic Information Systems tools for 3D prints
Abstract The presentation of landforms in two-dimensional graphics may not always be clear and understandable to every viewer. The presentation of landforms, as well as other types of characteristics and issues in three-dimensional space can bring many advantages in the process of better understanding of the surrounding reality. The primary purpose of this research is to put forward a simple scheme, accessible to any Geographic Information Systems user, for generating 3D physical terrain models for any area of the Earth. The presented scheme can be used anywhere in the world, however, for the purpose of illustrating its capabilities, a case study of a selected area – the Tatra Mountain range – was conducted in this paper. As part of the study, a 3D model was developed based on a Digital Elevation Model obtained from an open source, i.e. MapTiler. An indisputable advantage of the study is that the designed process flow in its structure takes into account only generally available tools and software (the model was prepared in the QGIS program). However, a certain limitation is the process of printing itself, which depends on the availability of specialized printing equipment. In this case study, FDM (Fused Deposition Modeling) technology was used for printing, and the model itself was prepared on a Creality Ender 7 printer. The proposed flowchart, on the one hand, unifies and simplifies the process of creating physical 3D models, while on the other hand, it provides opportunities for GIS users and developers to develop the proposed solution.
Wpływ nośników w postaci krzemionki i ligniny na różnorodność mikrobiomu bakteryjnego oraz wydajność fermentacji metanowej
Application of a multi-criteria decision support system for assessing development potential in flood risk areas - Case study of the Warta River
- 1 (current)
- 2
- 3
- 4
- 5
