2022, Pilarska, Agnieszka, Bula, Karol, Pilarski, Krzysztof, Adamski, Mariusz, Wolna-Maruwka, Agnieszka, Kałuża, Tomasz, Magda, Przemysław, Boniecki, Piotr

The management of waste polylactide (PLA) in various solutions of thermophilic anaerobic digestion (AD) is problematic and often uneconomical. This paper proposes a different approach to the use of PLA in mesophilic AD, used more commonly on the industrial scale, which consists of assigning the function of a microbial carrier to the biopolymer. The study involved the testing of waste wafers and waste wafers and cheese in a co-substrate system, combined with digested sewage sludge. The experiment was conducted on a laboratory scale, in a batch bioreactor mode. They were used as test samples and as samples with the addition of a carrier: WF—control and WFC—control; WF + PLA and WFC + PLA. The main objective of the study was to verify the impact of PLA in the granular (PLAG) and powder (PLAP) forms on the stability and efficiency of the process. The results of the analysis of physicochemical properties of the carriers, including the critical thermal analysis by differential scanning calorimetry (DSC), as well as the amount of cellular biomass of Bacillus amyloliquefaciens obtained in a culture with the addition of the tested PLAG and PLAP, confirmed that PLA can be an effective cell carrier in mesophilic AD. The addition of PLAG produced better results for bacterial proliferation than the addition of powdered PLA. The highest level of dehydrogenase activity was maintained in the WFC + PLAG system. An increase in the volume of the methane produced for the samples digested with the PLA granules carrier was registered in the study. It went up by c.a. 26% for WF, from 356.11 m3 Mg−1 VS (WF—control) to 448.84 m3 Mg−1 VS (WF + PLAG), and for WFC, from 413.46 m3 Mg−1 VS, (WFC—control) to 519.98 m3 Mg−1 VS (WFC + PLAG).

2022, Pilarska, Agnieszka, Pilarski, Krzysztof, Adamski, Mariusz, Zaborowicz, Maciej, Cais-Sokolińska, Dorota, Wolna-Maruwka, Agnieszka, Niewiadomska, Alicja

This article aims to present the results of research on anaerobic digestion (AD) of waste wafers (WF-control) and co-substrate system—waste wafers and cheese (WFC-control), combined with digested sewage sludge. The aim of this study was to assess the physicochemical parameters of the diatomaceous earth/peat (DEP; 3:1) carrier material and to verify its impact on the enzymatic activity and the process performance. The experiment was conducted in a laboratory, in a periodical mode of operation of bioreactors, under mesophilic conditions. The results of analyses of morphological-dispersive, spectroscopic, adsorption, thermal, and microbiological properties confirmed that the tested carrier material can be an excellent option to implement in biotechnological processes, especially in anaerobic digestion. As part of the experiment, the substrates, feedstock, and fermenting slurry were subjected to the analysis for standard process parameters. Monitoring of the course of AD was performed by measuring the values of key parameters for the recognition of the stability of the process: pH, VFA/TA ratio (volatile fatty acids/total alkalinity), the content of NH4+, and dehydrogenase activity, as an indicator of the intensity of respiratory metabolism of microorganisms. No significant signals of destabilization of the AD process were registered. The highest dehydrogenase activity, in the course of the process, was maintained in the WFC + DEP system. The microbial carrier DEP, used for the first time in the anaerobic digestion, had a positive effect on the yield of methane production. As a result, an increase in the volume of produced biogas was obtained for samples fermented with DEP carrier material for WF + DEP by 13.18% to a cumulative methane yield of 411.04 m3 Mg−1 VS, while for WFC + DEP by 12.85% to 473.91 m3 Mg−1 VS.