Filters
A simulation study of noise exposure in sledge-based cable yarding operations
Ensuring the safety of forestry workers is a key challenge, particularly when working with partly mechanized harvesting systems. Cable yarding is typically used in steep terrain timber harvesting. For long-distance extraction, one of the few alternatives is to use sledge yarders, but these machines may expose workers to high doses of noise. The goal of this study was to model haulers’ exposure to noise in sledge-based cable yarding operations, based on a simulation approach that considered variable factors such as the yarding distance, lateral yarding distance, and average skyline height. Taken into consideration were 165 scenarios developed by examining the variation in yarding distance (500 to 1500 m, with a step of 100 m), lateral yarding distance (10 to 50 m, with a step of 10 m), and average skyline height above the ground (10, 15, and 20 m). The simulations assumed an 8-h working day with a break of 1 h. The models and statistics published by other studies were used to calculate the time consumption and number of work cycles completed within a working day. These data were used to compute the equivalent exposure to noise (LAeq) for each scenario, as well as for those work elements that were likely to expose the haulers to noise the most. The presented findings indicated that (i) the exposure to noise was higher than 100 dB(A), irrespective of variation in the considered factors; (ii) the trend in exposure was characterized by polynomials in relation to the extraction distance, and the magnitude of exposure was consistently affected by variation in the considered factors; and (iii) without hearing protection, the empty and loaded turns exposed workers to noise over the permissible limits. These findings strongly suggest the use of hearing protection when working in close proximity to sledge-based cable yarding operations. The methods proposed in this study in the form of simulation may help benchmark other forest operations.
Quality of Pellets Obtained from Whole Trees Harvested from Plantations, Coppice Forests and Regular Thinnings
Technodiversity - glossary of forest operations terms
The Technodiversity project addresses technological diversity by gathering a common basis of technological knowledge and increasing the sensitivity for diversity in forest engineering. It aims to bring together and make generally available the existing knowledge in forest operations that is scattered across various European countries. It will serve as a bridge between different regions of Europe and generations of students, practitioners, scientists and academics. In this article, a small part of the e-learning module (https://technodiversity-moodle.ibe.cnr.it/) is presented in a glossary of some of the terms of forest operations.
Mechanised Harvesting of Broadleaved Tree Species in Europe
Abstract Purpose of the Review The application of cut-to-length (CTL) technology for harvesting and processing timber from broadleaved tree species is a challenging process, due to thick branches, stem sweep, forks and high wood density. The objective of this review was to describe the current state of harvester use and characterise the effectiveness of mechanised forest operations for broadleaved and mixed forest stands in Europe, paying particular attention to productivity and product quality aspects. An additional aim was to identify the greatest difficulties associated with harvesting broadleaved tree species today and to indicate future challenges and areas for improvement. Recent Findings An interest in wider harvester use for broadleaved tree species started after the storm Lothar in France in 1999. Early experiences demonstrated that lower productivity is common when harvesting broadleaved tree species, due to limitations in delimbing and the high frequency of sweep. Initially, modifications were made to harvester heads, while a newly designed head (CTL 40 HW) was later developed within a European project in 2005–2007. Using various heads, very high productivity was achieved in some cases, but log recovery was unsatisfactory, with large tree tops left without delimbing. The delimbing was of lower quality and log length inaccuracy was observed, as well as economic losses due to damage to plywood caused by feed rollers. These issues resulted in a change in harvester head construction, including work on a patent for a head designed specifically for harvesting broadleaved tree species. Summary The harvester heads that have been developed to date for broadleaved tree species have mainly been used within Central Europe, where the high incidence of broadleaved tree species and their particular morphological features (thick branches and sweep) are a major challenge for CTL technology. There have been many research projects related to this issue: in the last 15 years, there were a few larger initiatives leading to the design and development of harvester heads for broadleaved tree species, with participation from institutions and universities in France, Germany and Poland. There are currently no ongoing initiatives, but the formation of new ones is strongly recommended because today’s forests have a growing share of broadleaved tree species and are being managed to an increasing extent with CTL technology.
Harvester Efficiency During Thinning Operations in Alder Planted Stands with Some of Coppice Origin
In Central European conditions, harvester use becomes more popular for broadleaved tree species, though there are still some difficulties with effective delimbing of satisfactory quality. Considering these issues, economic aspects are ultimately crucial when deciding on the use of harvesters and assessing the effectiveness of their productivity. The objective of the present research was to apply different harvesters in thinning of alder stands to determine their productivity level focusing on the use of tree trunk for logs. The study was carried out in alder stands under thinning where five different harvesters were used in nine stands, five of which were of coppice origin. Additionally, in six cases, harvesting was done after the growing season and in three cases during the growing season, when trees were covered with leaves. An average productivity was 14.42 m3 PMH0-1, with maximum values of 24.34 m3 PMH0-1 in a coppice stand, and 23.66 m3 PMH0-1 in a planted stand. Delimbing was carried out in the tree crowns with the mean diameter as small as 7.9 cm under bark, which shows very good use of the tree trunk for logs. It was also established that the thicker the tree, the bigger the top diameter of the last log, leading to bigger biomass production, e.g. for energy purposes, but also with smaller effectiveness of log processing.
Determining Harvester Productivity Curves of Thinning Operations in Birch Stands of Central Europe
Silver birch (Betula pendula Roth) is a popular tree species forming stands in nearly the whole of Europe. In Poland, birch is one of the most representative broadleaved species growing on rather poor soils, very often as a mix species with Scots pine (Pinus sylvestris L.). In Central Europe, birch forms trunk often with sweeps, and at the older age with thick branches. Due to that, a harvester thinning operation in birch stands can be challengeable when trying to process logs from the top part of trees, which can finally impact on productivity. The objective of this research was to determine harvester productivity for birch with particular attention to production of logs from the top part of a tree. The research was carried out in stands of North and North-West Poland. All together 21 tests were completed in 16 stands, in which 9 harvesters were used (8 different models). The mean diameter of harvested trees was 23.7 cm with the mean height of 21.7 m. Obtained productivity without delays was on average 21.98 m3 h-1 and varied from as low as 5.14 to maximum 44.66 m3 h-1, and depended mainly on harvested tree size. It was also confirmed that top diameter of the last log depended on diameter at breast height (DBH). The model developed based on that relationship can be used for prediction of biomass volume from birch stands when harvesters are used for thinning.