Filters
Use of Shredded Recycled Plastic as Filter Bed Packing in a Vertical Flow Filter for Onsite Wastewater Treatment Plants: Preliminary Findings
Household wastewater is a problem, especially in areas with a dispersed settlement where there is no wastewater collection system or wastewater treatment plant. In this case, it is necessary to build a local or onsite wastewater treatment plant. This paper is an attempt to analyse the possibility of using recycled shredded ABS plastic (acrylonitrile butadiene styrene) as packing media in an experimental vertical flow filter for use in on-site wastewater treatment plants. Studies have shown that shredded recycled ABS is a promising filtration material that has several features important in the treatment process, like a large surface area, high mechanical strength and chemical inertness. The system was operated with a hydraulic load of 50 dm3/m2 (3 months). BOD5 (biochemical oxygen demand), COD (chemical oxygen demand), and total suspended solids (TSS) reduction efficiency in the primary effluent was high; 94.4%, 77.8%, and 92.8%, respectively.
The Efficiency of a Biological Reactor in a Domestic Wastewater Treatment Plant Operating Based on ABS (Acrylonitrile Butadiene Styrene) Material and Recycled PUR (Polyurethane) Foam
The primary objective of this research was to assess the efficacy of a novel solution under conditions closely resembling those of real-world scenarios. Biological beds, or filters, hold significant potential for widespread implementation in individual households, particularly in areas with dispersed housing. The system’s aim was to improve the quality of wastewater treated in on-site domestic biological treatment plants. A pivotal aspect of the project involved developing a prototype research installation for conducting comprehensive testing. Our installation system consisted of several components designed to create a laboratory-scale model for domestic wastewater treatment. The model comprised four biological reactors filled with ABS material and secured by a PUR frame. Additionally, the tested model included a controller for wastewater dosing control, a septic tank as a reservoir, and four tanks for collecting purified wastewater. Through regression analysis using the Generalized Linear Model (GLM), a correlation between CODCr and TSS was revealed. This study presents the research findings concerning the development of a prototype installation that incorporates an advanced reactor or filter. The data derived from this research have the potential to contribute to the creation of products that enhance the performance and efficiency of household wastewater treatment systems.