2022, Pilarska, Agnieszka, Bula, Karol, Pilarski, Krzysztof, Adamski, Mariusz, Wolna-Maruwka, Agnieszka, Kałuża, Tomasz, Magda, Przemysław, Boniecki, Piotr

The management of waste polylactide (PLA) in various solutions of thermophilic anaerobic digestion (AD) is problematic and often uneconomical. This paper proposes a different approach to the use of PLA in mesophilic AD, used more commonly on the industrial scale, which consists of assigning the function of a microbial carrier to the biopolymer. The study involved the testing of waste wafers and waste wafers and cheese in a co-substrate system, combined with digested sewage sludge. The experiment was conducted on a laboratory scale, in a batch bioreactor mode. They were used as test samples and as samples with the addition of a carrier: WF—control and WFC—control; WF + PLA and WFC + PLA. The main objective of the study was to verify the impact of PLA in the granular (PLAG) and powder (PLAP) forms on the stability and efficiency of the process. The results of the analysis of physicochemical properties of the carriers, including the critical thermal analysis by differential scanning calorimetry (DSC), as well as the amount of cellular biomass of Bacillus amyloliquefaciens obtained in a culture with the addition of the tested PLAG and PLAP, confirmed that PLA can be an effective cell carrier in mesophilic AD. The addition of PLAG produced better results for bacterial proliferation than the addition of powdered PLA. The highest level of dehydrogenase activity was maintained in the WFC + PLAG system. An increase in the volume of the methane produced for the samples digested with the PLA granules carrier was registered in the study. It went up by c.a. 26% for WF, from 356.11 m3 Mg−1 VS (WF—control) to 448.84 m3 Mg−1 VS (WF + PLAG), and for WFC, from 413.46 m3 Mg−1 VS, (WFC—control) to 519.98 m3 Mg−1 VS (WFC + PLAG).

2023, Pilarska, Agnieszka, Kulupa, Tomasz, Kubiak, Adrianna, Wolna-Maruwka, Agnieszka, Pilarski, Krzysztof, Niewiadomska, Alicja

In recent years, growing environmental awareness, the need to reduce greenhouse gas emissions, and the energy crisis have led many countries to seek alternative energy sources. One of the most promising solutions is biogas production via anaerobic digestion (AD), whose substrate can be organic-rich and easily biodegradable food waste (FW). This waste is a significant part of the global waste problem, and its use for energy production is beneficial to both the environment and the economy. This paper presents important issues concerning the monitoring of the AD process, as well as standard and innovative, for the implementation of this process, technological solutions. The aim of the measures taken to optimise the process is to increase AD efficiency and obtain the highest possible methane content in biogas. Two approaches—pretreatment and anaerobic co-digestion (AcoD)—have been integral to the implementation of AD of food waste for years. They are presented in this paper based on a review of recent research developments. Pretreatment methods are discussed with particular emphasis on mechanical, chemical and biological methods. The AcoD of FW with different organic substrates has been extensively reviewed, as confirmed by numerous studies, where higher buffer capacity and optimum nutrient balance enhance the biogas/methane yields. Attention was also paid to the parameters, operating mode and configurations of anaerobic digesters, with a thorough analysis of the advantages and disadvantages of each solution. The article concludes with a brief presentation of the development perspectives for the discussed FW management method and recommendations.

2022, Pilarska, Agnieszka, Pilarski, Krzysztof, Adamski, Mariusz, Zaborowicz, Maciej, Cais-Sokolińska, Dorota, Wolna-Maruwka, Agnieszka, Niewiadomska, Alicja

This article aims to present the results of research on anaerobic digestion (AD) of waste wafers (WF-control) and co-substrate system—waste wafers and cheese (WFC-control), combined with digested sewage sludge. The aim of this study was to assess the physicochemical parameters of the diatomaceous earth/peat (DEP; 3:1) carrier material and to verify its impact on the enzymatic activity and the process performance. The experiment was conducted in a laboratory, in a periodical mode of operation of bioreactors, under mesophilic conditions. The results of analyses of morphological-dispersive, spectroscopic, adsorption, thermal, and microbiological properties confirmed that the tested carrier material can be an excellent option to implement in biotechnological processes, especially in anaerobic digestion. As part of the experiment, the substrates, feedstock, and fermenting slurry were subjected to the analysis for standard process parameters. Monitoring of the course of AD was performed by measuring the values of key parameters for the recognition of the stability of the process: pH, VFA/TA ratio (volatile fatty acids/total alkalinity), the content of NH4+, and dehydrogenase activity, as an indicator of the intensity of respiratory metabolism of microorganisms. No significant signals of destabilization of the AD process were registered. The highest dehydrogenase activity, in the course of the process, was maintained in the WFC + DEP system. The microbial carrier DEP, used for the first time in the anaerobic digestion, had a positive effect on the yield of methane production. As a result, an increase in the volume of produced biogas was obtained for samples fermented with DEP carrier material for WF + DEP by 13.18% to a cumulative methane yield of 411.04 m3 Mg−1 VS, while for WFC + DEP by 12.85% to 473.91 m3 Mg−1 VS.