Filters
Properties of Particle Boards Containing Polymer Waste
Nowadays, a significant increase in interest in renewable energy sources can be observed. Wind farms have been one of the solutions representing this trend for many years. One of the important elements of windmills is the blades. The data indicate that what to do with the blades after their use is a global problem, and so it is important to find a way to recycle them. Hence, this work aimed to use these blades in the production of wood-based materials. Two fractions of a fragmented blade were used for the tests: a small one and large one. Boards characterized by densities of 650 kg/m3 and 700 kg/m3 were produced, in which the assumed substitution of the wood material with a polymer was 20% or 40%. Mechanical properties such as bending strength (MOR), modulus of elasticity (MOE), and internal bond strength (IB) were investigated. The 2S65 variant achieved the highest static bending strength and a modulus of elasticity of 2625 N/mm2. The second best result was noted for the 4S65 variant, which was significantly different from the 2S65 variant. In the case of the variants with a density of 700 kg/m3, no significant differences were found and their results were significantly lower. Moreover, research on thickness swelling (TS) after 24 h of immersion and water absorption (WA) were also conducted. The obtained results indicate that the manufactured boards are characterized by good physical and mechanical properties.
The Effect of Treatment with Fire Retardant on Properties of Birch Veneer and Manufactured Fire-Resistant Plywood
The effect of urea-formaldehyde adhesive modification with diisocyanate-functionalized nanocellulose on the properties of particleboard
Selected Chemical and Physical Properties of Pine Wood Chips Inoculated with Aspergillus and Penicillium Mold Fungi
Mold fungi representing genera of Penicillium and Aspergillus commonly develop on the surface of freshly harvested wood chips during storage. As a result, they are often considered as low-quality material and intended for incineration. Thus, the aim of the present study was to investigate the effect of wood chips infestation with mold fungi representing genera of Aspergillus and Penicillium on their basic chemical and physical properties, such as: chemical structure (evaluated with FTIR spectroscopy), mass loss and hygroscopicity, after an incubation of 3, 6 and 9 weeks. Based on the visual assessment and ergosterol content analysis, it was found that inoculation of wood chips with molds led to the intense fungal development on their surface. However, as observed in FTIR spectra, the presence of molds caused no changes in wood chemical structure. Furthermore, no mass loss and no significant increase in the hygroscopicity of wood were observed. Therefore, pine wood chips overgrown by studied genera of fungi seem to be a valuable material for various applications.
The effect of impregnation with fire retardant on the properties of particleboard bonded with PF/pMDI adhesive
The effect of the tree dieback process on the mechanical properties of pine (Pinus sylvestris L.) wood
As a result of the progressing climate changes, there is an increase in the volume of pine deadwood harvested each year from Polish forests. Its presence is an important part of the forest ecosystem; however, there are some indications that the material obtained from dying trees can be characterized by lower quality and properties. Taking into account the growing issue of tree dieback, the volume of pine wood annually harvested in Poland, and the importance of wooden products from an economic standpoint, preliminary research aimed at recognizing the process and its effect on the mechanical properties was conducted. Model trees in Brzeg Forest District were selected based on the crown defoliation. The properties of wood obtained from trees representing three different categories of soundness were determined according to the relevant standards. Based on the results of density, modulus of elasticity, bending strength, and compressive strength, it was found that there were statistically significant differences in wood quality depending on the condition of the tree. The results were particularly interesting in the case of compressing strength, where a healthy tree of lower density showed a similar strength to a dying tree with a much higher density.