Filters
The Optimization of the Strength of Wood Adhesive Joints Supported by Steel Fasteners in Furniture Components
The strength properties of softwood components with bonded joints reinforced with fasteners were investigated and compared. Initial tests of the strength of the glue joints were carried out, with a change in the type of adhesive used. The application method significantly influenced the shear strength of the joint. With the adhesive and pre-bonding systems used, the shear strength of the adhesive joint of pine wood (Pinus silvestris L.) with PUR and PVAC resin was determined. The industrial results were 31% lower than in the shear test of the wooden joint bonded with PVAC glue. In terms of transverse shear force with staples, the joint has a transverse holding force that is higher than components connected with screws or nails. As the number of glue sticks increased, the shear strength of the pine wood increased. The strengths of the joined components in the glue roller method had an intermediate value. They did not differ significantly between the two-row gluing systems used. An increase in the force required to shear the bonded joint was observed for the different adhesive systems, the fasteners used, and their density.
Qualitative and Strength Analysis of Pine (Pinus Sylvestris L.) Wood Materials - Study of Pallet Elements
The manufacture of packaging products requires determining the strength requirements of the components that make up the structural elements of pallets, crates and other packaging. Wood, as a renewable material, is the basic raw material for manufacturing wooden pallets. The premise of the research is that the strength of pallets is derived from the characteristics of the components of the subassemblies. Strength tests of lumber were carried out, which determine the evaluation of the suitability of sawn materials. Verification of raw material properties determines the adaptation of individual assemblies to static and dynamic force loads. Pine (Pinus sylvestris L.) lumber was verified, taking into account the origin of the cross-sectional area and the presence of anatomical structure features. The results of the study confirm the influence of wood origin on the suitability of pine wood for wood packaging. The influence of a certain origin from the log can translate into changes in strength properties. It was found that wood density is not a critical parameter for evaluating the strength of lumber and product. Tests of separated structural lumber for wood packaging indicate significant differences in the condition of the wood and the magnitude of the strength parameter.