Filters
An Analysis of Changes in the Physicochemical and Mechanical Properties during the Storage of Smoked and Mould Salamis Made in Poland
The aim of the study was to analyse changes in the physicochemical, rheological, and textural properties occurring during the storage of industrially produced smoked salami and mould salami. Tests on these cold cuts were conducted on the 2nd, 15th, 30th, and 45th days of storage. There was a significant increase in the pH value of the mould salami from 5.16 on the 2nd day to 5.42 on the 45th day (p < 0.05). There was a downward trend in the Aw of the smoked salami sample from 0.892 on the 2nd day to 0.873 on the 45th day. The Aw in the mould salami sample decreased from 0.889 on the 2nd day to 0.847 on the 15th day and then increased to 0.871 on the 45th day (p < 0.05). In the first two test periods, the smoked salami was characterised by a higher modulus of elasticity value than the non-smoked salami but lower loss tangent and dynamic viscosity values. The hardness of the whole bars, as well as the hardness of the salami pieces, was affected by their storage time and the related water content. The texture test results showed that the smoked salami was more resistant to compressive force than the mould salami, which affected the sensory evaluation and ease of slicing of this type of salami.
Układ elektronicznego ucha do analizy właściwości akustycznych produktów spożywczych z hybrydowym modułem symulacji pracy peryferyjnego systemu słuchowego
Effects of two alternative feeding diets on growth, feed efficiency and meat quality in crossbreeding goose populations
Abstract This study evaluated the effects of two dietary protein sources - standard soybean meal (SBM) and local protein sources (LPS: yellow lupin and rapeseed meal) - on growth performance, feed efficiency, and meat quality in two goose reciprocal crossbred populations of Eskildsen (E) and Tapphorn (T). The research material consisted of 240 geese (120 from each of the two groups TE and ET). The following traits were recorded: growth, feed intake, feed conversion ratio (FCR), carcass composition, and meat chemical composition, including fatty acid profiles. Results showed that LPS-fed geese had reduced body weight gain (BWG) during the first 28 days; however, this difference diminished over time. While final body weights were similar, cumulative feed intake was higher and FCR less efficient in the LPS group. The TE genotype exhibited superior growth and carcass weights compared to ET, suggesting a maternal heterosis effect. Although protein and mineral content were unaffected, meat from LPS-fed geese had higher polyunsaturated fatty acids (PUFA) and lower fat content, indicating potential nutritional benefits. In conclusion, yellow lupin can serve as a viable alternative to SBM in goose diets. On the other hand, effects of population on these studied traits are usually significant. It indicates formulating feeding strategies should be included genetic origin of population.
Changes in the mechanical, sensory, and microbiological properties during the storage of innovative vegetable and meat soups for seniors
This study was conducted on vegetable soup with rabbit meat and vegetable soup with rabbit meat, beef balls, and carrots. The qualitative characteristics of the soups were adapted to the needs of elderly consumers. The soups used in the experiments were industrially produced. The aim of this study was to analyse changes in the mechanical, sensory, and microbiological properties of the soups occurring during their storage (1, 7, 14, and 21 days). Strength tests were performed at temperatures of 20 °C and 55 °C. Both soups had a high protein content (4.7–6.5%), low sugar (0.3–0.5%) and salt content (0.8%), and a fibre content of 1.4%. The texture analysis showed great similarity in the mechanical characteristics of both soups. The samples were characterised by low measured values for firmness (0.72 N) and cohesiveness (−0.14 N) in both temperatures. The average shear force of the beef balls with carrots at 20 °C was 12.3 N, but after heating, it decreased to 8.8 N (p < 0.05). The rheological tests on the soups showed that they were characterised by a relatively high viscosity (15–20 Pas at 55 °C). Storage of the soups for 21 days did not significantly affect their rheological parameters (p > 0.05). The soup with beef balls and carrots was rated higher by the sensory panel. On the 21st day of storage, the permitted limit of the count of bacteria was not exceeded in either of the samples. This study shows that the soups had desirable structural, nutritional, and sensory characteristics, which are important for this group of consumers. The values of the mechanical parameters of all the samples were low, and they were even significantly more reduced when the products were heated. This may suggest that the products should not be difficult to consume for seniors.
Microscopic Droplet Size Analysis (MDSA) of “Five Thieves’ Oil” (Olejek Pięciu Złodziei) Essential Oil after the Nebulization Process
Nowadays, due to a higher resistance to drugs, antibiotics, and antiviral medicaments, new ways of fighting pathogens are intensively studied. The alternatives for synthesized compositions are natural products, most of which have been known in natural medicine for a long time. One of the best-known and intensively investigated groups are essential oils (EOs) and their compositions. However, it is worth noting that the method of application can play a second crucial part in the effectiveness of the antimicrobial activity. EOs possess various natural compounds which exhibit antimicrobial activity. One of the compositions which is based on the five main ingredients of eucalyptus, cinnamon, clove, rosemary, and lemon is named “five thieves’ oil” (Polish name: olejek pięciu złodziei) (5TO) and is used in natural medicine. In this study, we focused on the droplet size distribution of 5TO during the nebulization process, evaluated by the microscopic droplet size analysis (MDSA) method. Furthermore, viscosity studies, as well as UV-Vis of the 5TO suspensions in medical solvents such as physiological salt and hyaluronic acid, were presented, along with measurements of refractive index, turbidity, pH, contact angle, and surface tension. Additional studies on the biological activity of 5TO solutions were made on the P. aeruginosa strain NFT3. This study opens a way for the possible use of 5TO solutions or emulsion systems for active antimicrobial applications, i.e., for surface spraying.
An instrumental analysis of changes in the physicochemical and mechanical properties of smoked and mould salamis during storage
Shaping Goose Meat Quality: The Role of Genotype and Soy-Free Diets
The aim of this study was to evaluate the influence of genotype and diet on geese from crossbreeding meat lines Tapphorn (T) and Eskildsen (E). This study was conducted on 240 crossbred geese assigned to two dietary groups: an SBM diet group fed a standard soybean-based diet and an LPS diet group fed a yellow lupin-based diet. Birds were reared under identical management conditions and slaughtered at 17 weeks of age. The following traits were recorded: meat colour (CIELab), pH24, cooking loss, breast and thigh muscle texture (shear force and energy), and sensory traits. The results showed a significant effect of both genotype and diet on meat quality. The LPS diet lowered shear force and energy (by ~11%, p < 0.001), reduced cooking loss in breast muscles (by ~5%, p < 0.001), and improved the juiciness and flavour of thigh muscles. The ET genotype positively influenced the meat colour intensity (lower L*, higher a*), while the lupin-based diet improved technological parameters, especially the water-holding capacity. The results confirm that replacing soybean meal with yellow lupin protein is an effective nutritional strategy that can improve goose meat quality and sustainability without compromising the sensory quality. These outcomes support developing soy-free feeding strategies in goose production to meet consumer expectations and reduce reliance on imported feed.