Filters
Polysiloxanes and Silanes with Various Functional Groups—New Compounds for Flax Fibers’ Modification
There is an increasing desire to use natural products that will be both effective and biodegradable. The aim of this work is to investigate the effect of modifying flax fibers with silicon compounds (silanes and polysiloxanes), as well as examining the effect of the mercerization process on their properties. Two types of polysiloxanes have been synthesized and confirmed by infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (NMR). Scanning electron microscopy (SEM), FTIR, thermogravimetry analysis (TGA) and pyrolysis-combustion flow calorimetry (PCFC) tests of the fibers were performed. On the SEM pictures, flax fibers purified and covered with silanes were visible after treatment. FTIR analysis showed stable bonds between the fibers and the silicon compounds. Promising results of thermal stability were obtained. It was also found that modification had a positive effect on the flammability. The conducted research showed that the use of such modifications, in the context of using flax fibers for composites, can yield very good results.
Aktualne metody usuwania jonów metali ze ścieków przemysłowych, w tym pochodzących z produkcji akumulatorów kwasowo-ołowiowych
Mycelium-Based Composites in Art, Architecture, and Interior Design: A Review
Mycelium-based composites (MBCs) have attracted growing attention due to their role in the development of eco-design methods. We concurrently analysed scientific publications, patent documents, and results of our own feasibility studies to identify the current design issues and technologies used. A literature inquiry in scientific and patent databases (WoS, Scopus, The Lens, Google Patents) pointed to 92 scientific publications and 212 patent documents. As a part of our own technological experiments, we have created several prototype products used in architectural interior design. Following the synthesis, these sources of knowledge can be concluded: 1. MBCs are inexpensive in production, ecological, and offer a high artistic value. Their weaknesses are insufficient load capacity, unfavourable water affinity, and unknown reliability. 2. The scientific literature shows that the material parameters of MBCs can be adjusted to certain needs, but there are almost infinite combinations: properties of the input biomaterials, characteristics of the fungi species, and possible parameters during the growth and subsequent processing of the MBCs. 3. The patent documents show the need for development: an effective method to increase the density and the search for technologies to obtain a more homogeneous internal structure of the composite material. 4. Our own experiments with the production of various everyday objects indicate that some disadvantages of MBCs can be considered advantages. Such an unexpected advantage is the interesting surface texture resulting from the natural inhomogeneity of the internal structure of MBCs, which can be controlled to some extent.
Activated carbons prepared from stump wood of various tree species by chemical activation and their application for water purification
AbstractActivated carbons (ACs) were produced from stump wood of different tree species, such as pine, bearded birch, and American black cherry using chemical activation with KOH and NaOH. The activated carbons were characterized and evaluated as adsorbents for eliminating bisphenol A (BPA) from aqueous solutions. The kinetics of adsorption and equilibrium adsorption, as well as the impact of solution pH and ionic strength, were examined. The kinetics were analyzed using the pseudo-first-order, pseudo-second-order, intra-particle diffusion, and Boyd kinetic models. The findings suggest that the adsorption kinetics followed the pseudo-second-order model. Additionally, the film diffusion was found to be the rate-determining step for the adsorption of BPA on all of the activated carbons. The data for adsorption equilibrium were tested using the Langmuir, Freundlich, and Sips equations, with results indicating that the Langmuir model was the most applicable. The capacity of activated carbons to adsorb BPA was dependent on their surface area. Higher BET surface areas resulted in increased adsorption. The birch-derived AC activated by NaOH had a monolayer adsorption capacity of 1.980 mmol/g, while the AC from black cherry activated with KOH had 2.195 mmol/g. The adsorption of BPA was pH-dependent, and no effect of ionic strength was observed. The activated carbons had very high adsorption capacities, indicating that stump wood is an excellent precursor for the production of highly effective adsorbents.
Mycelium-Based Composite Materials: Study of Acceptance
Mycelium-based composites (MBCs) are alternative biopolymers for designing sustainable furniture and other interior elements. These innovative biocomposites have many ecological advantages but present a new challenge in aesthetics and human product acceptance. Grown products, made using living mycelium and lignocellulosic substrates, are porous, have irregular surfaces and have irregular coloring. The natural origin of these types of materials and the fear of fungus can be a challenge. This research investigated the level of human acceptance of the new material. Respondents were students of architecture who can be considered as people involved in interior design and competent in the design field. Research has been performed on the authors’ prototype products made from MBCs. Three complementary consumer tests were performed. The obtained results measured the human reactions and demonstrated to which extents products made of MBCs were “likeable” and their nonobvious aesthetics were acceptable to the public. The results showed that MBC materials generally had a positive or not-negative assessment. The responses after the pairwise comparison of the MBC with wall cladding samples pointed out the advantage of ceramic reference material above the MBC based on an overall assessment. The respondents also believed that the chamotte clay cladding would be easier to fit into the aesthetics of a modern interior and would in better accordance with its style. Although the MBC was less visually appealing, the respondents nevertheless found it more interesting, original, and environmentally friendly. The experiments suggested that the respondents had double standards regarding MBCs. MBCs were generally accepted as ecological, but not in their own homes. All of these results support current and future applications of MBCs for manufacturing items where enhanced aesthetics are required.
Activated carbons from plum stones as efficient adsorbents for the removal of phenol and bisphenol A from aqueous solutions
KOH-activated tire pyrolysis char as an adsorbent for chloroorganic water pollutants
Activated carbons (ACs) produced from end-of-life tires with different tire pyrolysis char (TPC)-to-activator (KOH) ratios of 1:2, 1:3, and 1:4 were prepared and characterized. These materials were used as adsorbents for the removal of two common chloroorganic water contaminants such as 2,4-dichlorophenol (DCP) and 2,4-dichlorophenoxyacetic acid (2,4-D). The adsorption kinetics, equilibrium adsorption, and effects of solution pH were investigated. The adsorption of both adsorbates was found to be pH-dependent and preferred in acidic environments. The adsorption kinetics was evaluated using pseudo-first-order and pseudo-second-order kinetic models and mechanism - using Weber-Morris and Boyd models. Results demonstrated that the adsorption of DCP and 2,4-D on all ACs followed the pseudo-second-order model and was controlled by film diffusion. The Langmuir isotherm described the equilibrium data better than the Freundlich isotherm model. The maximum adsorption capacity of DCP adsorbed on AC1:2, AC1:3, and AC1:4 at equilibrium was 0.582, 0.609, and 0.739 mmol/g, respectively, while the maximum adsorption capacities for 2,4-D were 0.733, 0.937, and 1.035 mmol/g, respectively. The adsorption rate and efficiency were closely correlated with the porous structure of the tested adsorbents. The results showed that the activated carbons obtained from the scrap of end-of-life tires as raw materials could be used as a low-cost and alternative adsorbent for the removal of chlorinated organic pollutants from water.
Thermochemical modification of beech wood with ammonium hydroxide
AbstractFour variants of the thermochemical modification were conducted on beech wood at a temperature of 130 °C, employing NH4OH concentrations of 5% or 10% for durations of either 12 or 24 h. The weight% gain (WPG) and bulking coefficient (BC) were initially calculated. Subsequently, the wood’s degree of discoloration was assessed using the CIELAB-colour-system. Chemical structure alterations were determined through Fourier transform infrared spectroscopy (FTIR), while the compressive strength of the wood parallel to the grain was measured. As the NH4OH concentration increased and the treatment duration extended, the samples displayed simultaneous weight increase and volume reduction. The ΔE* values of the samples ranged from 19.33 to 21.09 units, indicating significant color alteration. FTIR analysis revealed differences between the spectra of the unmodified control sample and the NH4OH-treated samples. The modification reduced in hydroxyl and carboxyl groups within the main and side chains of hemicelluloses. Additionally, a decrease in the absorption peak intensity of the unconjugated carbonyl group at 1740 cm− 1 indicated a relative reduction in hemicellulose content. Compressive strength tests showed that the thermochemical modification improved the modulus of elasticity, increasing it from 10,898 MPa (in the control sample) to a range of 11,663 − 13,390 MPa. Similarly, the compressive strength increased from 77.10 MPa to 81.56-107.19 MPa. Interestingly, this improvement was more pronounced with higher concentrations of NH4OH and prolonged modification durations.
The Adsorptive Removal of Paracetamol as a Model Pollutant from an Aqueous Environment Using Activated Carbons Made from Selected Nutshells as Agricultural Waste
In this study, carbon adsorbents obtained from agricultural waste, i.e., walnut, hazelnut, and pistachio nutshells, were investigated for the removal of paracetamol (acetaminophen, 4-hydroxyacetanilide) (PAR) from aqueous solutions. Activated carbons (ACs) were produced via a two-step procedure. In the first step, the carbonization of nutshells was carried out at 600 °C, and in the second step, the chemical activation was carried out at 750 °C using alkaline activators, i.e., NaOH and KOH. For all of the ACs obtained and characterized, PAR adsorption kinetics, the adsorption at equilibrium, and the effects of the solution pH were investigated. All results obtained for each nutshell depend on the type of activating agent used. However, in the case of a given activator, there are differences resulting from the type of raw material. Kinetic and isothermal studies revealed that PAR adsorption follows the pseudo-second-order and the Langmuir models, respectively. The adsorption capacities of the ACs were very high and ranged from 332.2 to 437.8 mg/g. This study highlights the remarkable potential of nutshells as valuable and cost-effective precursors for the production of ACs that can effectively remove paracetamol from water.
Effect of Modification of Flax Fibers with Silanes and Polysiloxanes on the Properties of PLA-Based Composites
Fungi in Mycelium-Based Composites: Usage and Recommendations
Mycelium-Based Composites (MBCs) are innovative engineering materials made from lignocellulosic by-products bonded with fungal mycelium. While some performance characteristics of MBCs are inferior to those of currently used engineering materials, these composites nevertheless prove to be superior in ecological aspects. Improving the properties of MBCs may be achieved using an adequate substrate type, fungus species, and manufacturing technology. This article presents scientifically verified guiding principles for choosing a fungus species to obtain the desired effect. This aim was realized based on analyses of scientific articles concerning MBCs, mycological literature, and patent documents. Based on these analyses, over 70 fungi species used to manufacture MBC have been identified and the most commonly used combinations of fungi species-substrate-manufacturing technology are presented. The main result of this review was to demonstrate the characteristics of the fungi considered optimal in terms of the resulting engineering material properties. Thus, a list of the 11 main fungus characteristics that increase the effectiveness in the engineering material formation include: rapid hyphae growth, high virulence, dimitic or trimitic hyphal system, white rot decay type, high versatility in nutrition, high tolerance to a substrate, environmental parameters, susceptibility to readily controlled factors, easy to deactivate, saprophytic, non-mycotoxic, and capability to biosynthesize natural active substances. An additional analysis result is a list of the names of fungus species, the types of substrates used, the applications of the material produced, and the main findings reported in the scientific literature.
Effective Adsorption of Phenoxyacetic Herbicides by Tomato Stem-Derived Activated Carbons
Six activated carbons from tomato (Solanum lycopersicum L.) stems (TS-AC) were synthesized by carbonization and chemical activation using potassium hydroxide (KOH) and sodium hydroxide (NaOH) at temperatures of 550, 650, and 750 °C. These TS-ACs were then evaluated as adsorbents to remove 2,4-dichlorophenoxyacetic acid (2,4-D) and 2-methyl-4-chlorophenoxyacetic acid (MCPA) from aqueous solutions. The adsorption kinetics of both herbicides followed the pseudo-second-order model, closely correlating with the mesopore volume of the TS-AC. The Langmuir isotherm accurately described the adsorption process for both 2,4-D and MCPA. The porous structure of TS-AC, characterized by micropore volume and specific surface area, significantly influenced the maximum adsorption capacities. The adsorption of both herbicides was pH dependent, but ionic strength had no significant effect. Regeneration testing, conducted over three cycles, showed less than a 15% reduction in herbicide adsorption capacity. This study demonstrates that agricultural waste, specifically tomato stems, can be effectively valorized by using simple activation techniques in TS-AC that are efficient adsorbents to remove organic pollutants, such as herbicides, from aqueous media.
Valorization of Tomato Stems into Biochar for Efficient Adsorptive Removal of Cationic and Anionic Dyes from Aqueous Solutions
The biochars obtained by pyrolyzing tomato stems at temperatures of 400, 500, 600, and 700 °C were characterized, and their ability to absorb anionic (Direct Orange 26, DO26) and cationic (Rhodamine B, RhB) dyes from aqueous solutions was investigated. The effects of solution pH and ionic strength were studied. It was found that the adsorption process of both dyes was pH-dependent, but no effect of ionic strength was observed. The kinetics of dye adsorption on biochars were well described by the pseudo-second-order model. The equilibrium adsorption data were analyzed using the Freundlich, Langmuir, and Temkin isotherms. All three equations described dye adsorption on biochars quite well, although a slightly better fit was observed for the Freundlich model. The maximum adsorption capacities of BCs ranged from 54.44 mg/g (BC400) to 108.1 mg/g (BC700) for DO26 and from 4.483 mg/g (BC700) to 8.887 mg/g (BC400) for RhB. The study reveals that biochars derived from tomato stems can be used as efficient, low-cost adsorbents for the removal of anionic and cationic dyes from water.
Enhancing Functional and Visual Properties of Paulownia Wood Through Thermal Modification in a Steam Atmosphere
Paulownia elongata wood is characterized by rapid mass gain, but its limited mechanical strength hinders engineering applications. This study aimed to determine the effect of thermal modification in a steam atmosphere (at temperatures of 180 °C and 190 °C for 12 or 6 h with 3 or 6 h of steam dosing) on wood’s selected physicochemical and aesthetic properties. Color changes (CIELAB), chemical composition (FTIR), density, and compressive strength parallel to the grain were evaluated. The results showed a clear darkening of the wood, a shift in hues towards red and yellow, and an increase in color saturation depending on the treatment parameters. FTIR spectroscopy confirmed a reduction in hydroxyl and carbonyl groups, indicating thermal degradation of hemicelluloses and extractives. Wood density remained relatively stable, despite observed mass losses and reduced swelling. The most significant increase in compressive strength, reaching 27%, was achieved after 6 h of modification at 180 °C with a concurrent 6 h steam dosing time. The obtained results confirm that thermal treatment can effectively improve the functional and visual properties of paulownia wood, favoring its broader application in the furniture and construction industries.
Activated Carbons Derived from Different Parts of Corn Plant and Their Ability to Remove Phenoxyacetic Herbicides from Polluted Water
In this study, the adsorption of phenoxyacetic acid (PAA) and its chlorinated derivatives, including 4-chlorophenoxyacetic acid (4CPA) and 2,4-dichlorophenoxyacetic acid (2,4-D), on activated carbons (ACs) from corn kernels (AC-K), corn leaves (AC-L), and corn silk (AC-S) were investigated. The adsorption kinetics followed the pseudo-second-order model, and the film diffusion was the rate-limiting step. The adsorption rate increased in the order PAA < 4CPA < 2,4-D and was correlated with the porous structure (mesopore volume) of these ACs. The Langmuir isotherm models best fit the experimental data; PAA was adsorbed least and 2,4-D most preferentially. The observed trend (PAA < 4CPA < 2,4-D) was positively correlated with the molecular weight of the adsorbates and their hydrophobicity while being inversely correlated with their solubility in water. The adsorption for 2,4-D, according to the Langmuir equation, is equal to 2.078, 2.135, and 2.467 mmol/g and SBET 1600, 1720, and 1965 m2/g, respectively. The results for other herbicides showed a similar correlation. The adsorption of phenoxy herbicides was strongly pH-dependent. The ACs produced from corn biomass can be an eco-friendly choice, offering sustainable products that could be used as efficient adsorbents for removing phenoxyacetic herbicides from water.
Activated carbon prepared from corn biomass by chemical activation with potassium hydroxide
With the depletion of fossil fuel feedstocks, the lignocellulosic biomass, including the agro-wastes, can serve as the best alternative source to produce activated carbons (ACs). Corn biomass (corn leaves, stalks, cobs without kernels, silk, and kernels) were used to produce ACs in a two-step process. Crushed plant material was carbonized at 600 °C and then the obtained carbon was activated using potassium hydroxide at 750 °C. The content and type of surface oxygen functional groups were determined by the Boehm method and infrared spectroscopy. The porous structure of the obtained AC was determined by the nitrogen adsorption/desorption method at -196 °C, and the thermal resistance by the thermogravimetric method. The iodine number was also determined. The ACs derived from corn biomass were characterized with surfaces rich in chemical groups and revealed a highly developed porous structure. The specific BET surface area ranged from 1600 m2/g to 1965 m2/g. High values of iodine number approx. 1300 mg/g, indicated an extensive system of pores and their good adsorption properties.