Simple item page
 

The effect of the granulometric composition of beech chips from a CNC machining center on the environmental separation technique

cris.virtual.author-orcid#PLACEHOLDER_PARENT_METADATA_VALUE#
cris.virtual.author-orcid#PLACEHOLDER_PARENT_METADATA_VALUE#
cris.virtual.author-orcid#PLACEHOLDER_PARENT_METADATA_VALUE#
cris.virtual.author-orcid#PLACEHOLDER_PARENT_METADATA_VALUE#
cris.virtual.author-orcid0000-0003-4957-1042
cris.virtualsource.author-orcid#PLACEHOLDER_PARENT_METADATA_VALUE#
cris.virtualsource.author-orcid#PLACEHOLDER_PARENT_METADATA_VALUE#
cris.virtualsource.author-orcid#PLACEHOLDER_PARENT_METADATA_VALUE#
cris.virtualsource.author-orcid#PLACEHOLDER_PARENT_METADATA_VALUE#
cris.virtualsource.author-orciddb2ff8e2-8bc0-4fd4-bbc1-07ba3ca94ccf
dc.abstract.enThe aim of the paper is to determine the granulometric composition of chip removed from the beech lumber milling process using a CNC machining center SCM Tech Z5 in the range of commonly used technical and technological parameters under standard conditions of feed speed: vf = 1 ÷ 5 m.min-1 and the thickness of the removed layer: e = 1, 3 and 5 mm. Another goal of the paper was to select a suitable separation technique that would be sufficient to effectively capture the largest possible dispersion of fractions in the beech lumber milling process. Granulometric analysis showed that under the given conditions in the milling process the largest proportion of coarse and medium coarse fraction is formed and particles with a size smaller than 32 μm are not formed. For this reason, it is our recommendation to choose a combination of dry mechanical separators together with fabric filters, as mechanical separators are able to capture mainly larger particle fractions. Fabric filters would serve to trap any finer particles, thus saving the user from greater wear of the coarse and medium coarse fractions, which would increase the wear of the filter cloth to an increased extent
dc.affiliationWydział Leśny i Technologii Drewna
dc.affiliation.instituteKatedra Meblarstwa
dc.contributor.authorKučerka , Martin
dc.contributor.authorOčkajová, Alena
dc.contributor.authorKminiak, Richard
dc.contributor.authorPędzik, Marta
dc.contributor.authorRogoziński, Tomasz
dc.date.access2025-12-04
dc.date.accessioned2025-12-05T08:15:22Z
dc.date.available2025-12-05T08:15:22Z
dc.date.copyright2022-06
dc.date.issued2022
dc.description.accesstimeat_publication
dc.description.bibliographyil., bibliogr.
dc.description.financepublication_nocost
dc.description.financecost0,00
dc.description.if1,0
dc.description.number1
dc.description.points40
dc.description.versionfinal_published
dc.description.volume64
dc.identifier.doi10.17423/afx.2022.64.1.08
dc.identifier.eissn2730-1176
dc.identifier.issn1336-3824
dc.identifier.urihttps://sciencerep.up.poznan.pl/handle/item/6221
dc.identifier.weblinkhttps://df.tuzvo.sk/sk/archive-afxz
dc.languageen
dc.relation.ispartofActa Facultatis Xylologiae Zvolen
dc.relation.pages89-97
dc.rightsCC-BY
dc.sciencecloudnosend
dc.share.typeOPEN_JOURNAL
dc.subject.enbeech blanks
dc.subject.enCNC machining center
dc.subject.engranulometric composition of chips
dc.subject.enseparation ability
dc.titleThe effect of the granulometric composition of beech chips from a CNC machining center on the environmental separation technique
dc.typeJournalArticle
dspace.entity.typePublication