Filters
Application of Experimental Studies of Humidity and Temperature in the Time Domain to Determine the Physical Characteristics of a Perlite Concrete Partition
These days, the use of natural materials is required for sustainable and consequently plus-, zero- and low-energy construction. One of the main objectives of this research was to demonstrate that pelite concrete block masonry can be a structural and thermal insulation material. In order to determine the actual thermal insulation parameters of the building partition, in situ experimental research was carried out in real conditions, taking into account the temperature distribution at different heights of the partition. Empirical measurements were made at five designated heights of the partition with temperature and humidity parameters varying over time. The described experiment was intended to verify the technical parameters of perlite concrete in terms of its thermal insulation properties as a construction material used for vertical partitions. It was shown on the basis of the results obtained that the masonry made of perlite concrete blocks with dimensions of 24 × 24.5 × 37.5 cm laid on the mounting foam can be treated as a building element that meets both the structural and thermal insulation requirements of vertical single-layer partitions. However, it is important for the material to work in a dry environment, since, as shown, a wet perlite block has twice the thermal conductivity coefficient. The results of the measurements were confirmed, for they were known from the physics of buildings, the general principles of the formation of heat and the moisture flow in the analysed masonry of a perlite block. Illustrating this regularity is shown from the course of temperature and moisture in the walls. The proposed new building material is an alternative to walls with a layer of thermal insulation made of materials such as polystyrene or wool and fits into the concept of sustainable construction, acting against climate change, reducing building operating costs, improving living and working conditions as well as fulfilling international obligations regarding environmental goals.
Fuzzy analytical hierarchy process methods in changing the damming level of a small hydropower plant: Case study of Rosko SHP in Poland
Use of Drone LIDAR Scanning for Volume Estimation of Stockpiles Accumulated in Post-Flotation Sedimentation Ponds – A Case Study of Bukowno (Southern Poland)
This study evaluates the use of drone - mounted LiDAR scanning to estimate the volume of post - flotation tailings accumulated in sedimentation ponds located in Bukowno, southern Poland. The survey was conducted using a DJI Matrice 350 RTK UAV equipped with th e Zenmuse L2 LiDAR sensor, supported by high - accuracy GNSS measurements using the Topcon HiPer XR receiver. The main goal was to generate a high - resolution 3D model of the tailings storage area and assess the geometric accuracy of horizontal and vertical g eodetic coordinates using control points and statistical validation. Post - processing of LiDAR data was performed using DJI Terra, followed by spatial and statistical analyses in QGIS and RStudio. Statistical evaluation included descriptiv e statistics, Tuke y’s outlier detection, and the Shapiro – Wilk test to verify the normality of error distributions. The horizontal accuracy was assessed using 10 control points, while the vertical accuracy relied on 46 measured control points. The analysis confirme d the high accuracy of the generated model, with average absolute elevation error not exceeding 1.7 cm and horizontal deviations ranging from 1.7 cm (Δx) to 3.6 cm (Δy). The volume of deposited tailings above the reference elevation of 320.00 m a.s.l. was calcul ated to be 37.49 million m³ over an area of 137.9 hectares. The Eastern pond was further divided into operational subsections to supp ort functional assessment and monitoring strategies .
Influence of Variable Moisture Conditions on the Value of the Thermal Conductivity of Selected Insulation Materials Used in Passive Buildings
The interest in passive construction that has low demand for thermal energy continues to grow every year. It is related to both the reduction in maintenance costs of buildings and the growing environmental awareness in societies. Passive houses are characterised by very good thermal insulation properties of their external partitions. This paper presents the results of tests on the thermal conductivity for three different types of building materials, assuming their use as thermal insulation. The materials were subjected to water absorption tests during long-term immersion. The purpose of this study was to simulate water absorption caused by long-term water exposure. The tests were carried out on a perlite concrete block, a sheet of polyurethane foam applied by spraying and expanded clay in a loose form in three different fractions. The tested insulation materials were selected due to their different form, structure, and porosity characteristics, which largely determined the value of the thermal conductivity. A perlite concrete block is a new, innovative product, of which manufacturer’s data are not yet available as the product is currently at the stage of detailed research. The results were analysed statistically and used in graphs to show the dependence of the value of the thermal conductivity on moisture content of the samples. The purpose of this study was to indicate the importance of the proper incorporation of insulation materials into buildings, their storage before construction and use in the post-construction phase. Building standards for passive houses place high demands on materials used. In order to fully enjoy the advantages of passive buildings, i.e., lower energy consumption and benefits for the natural environment due to lower consumption of energy generated from non-renewable energy sources, it is necessary to use certified building materials and ensure proper use of objects. The studies quoted in this paper indicate to what extent the influence of moisture content negatively affects the properties of insulation materials in external partitions.
Field Measurements and Machine Learning Algorithms to Monitor Water Quality in Lakes Located in Landscape Parks – A Case Study
Destructive Effects of Slag from Municipal Waste Incineration Plants on Cement Composites
The increasing production of solid waste and the scarcity of natural aggregates as a matter of fact have made waste recycling a necessity. One such waste, which is generated in large quantities, is slag. However, slag from incineration plants may contain harmful elements that adversely affect the physical, chemical and mechanical properties of cement composites. This study presents laboratory research results on the effect of slag from the Poznan Municipal Waste Thermal Conversion Plant (Poland) on the physicochemical properties of cement composites. The samples were analyzed by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). It was shown that the slag analyzed contained significant amounts of aluminum, which had a direct effect on the structure of the concrete. An example of this influence is the release of hydrogen during reactions, which causes swelling and cracking of the concrete and reduces its mechanical strength. The authors emphasize that waste aggregate (slag) can be effectively used in the production of concrete after appropriate processing that reduces the risk of adverse effects.
Hydrological Effects of the Planned Power Project and Protection of the Natura 2000 Areas: A Case Study of the Adamów Power Plant.
The planned construction of a steam–gas unit at the Adamów Power Plant raises questions about the potential hydrological impact on the neighboring Natura 2000 protected areas, particularly the Middle Warta Valley (PLB300002) and the Jeziorsko Reservoir (PLB100002). These ecosystems play a key role in protecting bird habitats and biodiversity, and any changes in water management can affect their condition. This paper presents a detailed hydrological analysis of the Warta River and Jeziorsko Reservoir for 2018–2022, with a focus on low-flow periods. The Peak Over Threshold (POT) method and Q70% threshold were used to identify the frequency, length, and seasonality of low-flow periods in three water gauge profiles: Uniejów, Koło, and Sławsk. The longest recorded low-flow episode lasted 167 days. The permissible water intake for the investment (up to 0.8 m3∙s–1) is in accordance with the applicable permits and is used mainly for cooling purposes. Calculations indicate that under maximum intake conditions, the water level reduction in the Jeziorsko Reservoir would be between 1.7 and 2.0 mm∙day–1, depending on the current level of filling. Such changes do not disrupt the natural functions of the reservoir under typical conditions, although during prolonged droughts, they can pose a threat to protected areas. An analysis of the impact of periodic water overflow into the Kiełbaska Duża River indicates its negligible effect on water levels in the reservoir and flows in the Warta River. The results underscore the need for the integrated management of water and power resources, considering the increasing variability in hydrological conditions. Ensuring a balance between industrial needs and environmental protection is key to minimizing the potential impact of investments and implementing sustainable development principles.