Filters
Assessment of Chemical Composition and Oxidative Stability in Cold-pressed Date Kernel Oil from Phoenix dactylifera L.: Implications for Food Quality and Sustainability
Stigmasterol and its esters encapsulated in liposomes: Characterization, stability, and derivative formation
Evaluation of Selected Medicinal, Timber and Ornamental Legume Species’ Seed Oils as Sources of Bioactive Lipophilic Compounds
Bioactive lipophilic compounds were investigated in 14 leguminous tree species of timber, agroforestry, medicinal or ornamental use but little industrial significance to elucidate their potential in food additive and supplement production. The tree species investigated were: Acacia auriculiformis, Acacia concinna, Albizia lebbeck, Albizia odoratissima, Bauhinia racemosa, Cassia fistula, Dalbergia latifolia, Delonix regia, Entada phaseoloides, Hardwickia binata, Peltophorum pterocarpum, Senegalia catechu, Sesbania sesban and Vachellia nilotica. The hexane-extracted oils of ripe seeds were chromatographically analysed for their fatty acid composition (GC-MS), tocochromanol (RP-HPLC/FLD), squalene and sterol (GC-FID) content. A spectrophotometrical method was used to determine total carotenoid content. The results showed generally low oil yield (1.75–17.53%); the highest was from H. binata. Linoleic acid constituted the largest proportion in all samples (40.78 to 62.28% of total fatty acids), followed by oleic (14.57–34.30%) and palmitic (5.14–23.04%) acid. The total tocochromanol content ranged from 100.3 to 367.6 mg 100 g−1 oil. D. regia was the richest and the only to contain significant amount of tocotrienols while other oils contained almost exclusively tocopherols, dominated by either α-tocopherol or γ-tocopherol. The total carotenoid content was highest in A. auriculiformis (23.77 mg 100 g−1), S. sesban (23.57 mg 100 g−1) and A. odoratissima (20.37 mg 100 g−1), and ranged from 0.7 to 23.7 mg 100 g−1 oil. The total sterol content ranged from 240.84 to 2543 mg 100 g−1; A. concinna seed oil was the richest by a wide margin; however, its oil yield was very low (1.75%). Either β-sitosterol or Δ5-stigmasterol dominated the sterol fraction. Only C. fistula oil contained a significant amount of squalene (303.1 mg 100 g−1) but was limited by the low oil yield as an industrial source of squalene. In conclusion, A. auriculiformis seeds may hold potential for the production of carotenoid-rich oil, and H. binata seed oil has relatively high yield and tocopherol content, marking it as a potential source of these compounds.
Effect of the Bleaching Process on Changes in the Fatty Acid Profile of Raw Hemp Seed Oil (Cannabis sativa)
Many refined oils from soybean, rapeseed, and sunflower, among others, are available on the food market, except olive oil. Refining, on the small production scale of niche oils, is not used due to the high cost of the refining process. Unrefined oils are characterized by intense taste, odor, color, and undesirable nutrients. The problem to be solved is determining the effects of incomplete refining of niche oils on their composition. One process, which does not require the use of complex apparatus, is the bleaching process. The results presented in this article relate to the research stage, in which the aim is to evaluate the changes occurring in the oil due to the low-temperature bleaching process with different process parameters. The presented research results provide evidence of the absence of adverse changes in the fatty acid profile of hemp oil of the varieties ‘Finola’, ‘Earlina 8FC’, and ‘Secuieni Jubileu’. Seven different types of bleaching earth were used to bleach the oil in amounts of 2.5 and 5 g/100 g of vegetable oil. The fatty acid profile was obtained by gas chromatography (GC-FID). The obtained chromatograms were subjected to statistical analysis and principal component analysis (PCA). The results show that there was no effect of the type of bleaching earth and its amount on the change in the fatty acid profile of bleached oils. Only real differences between the types of hemp oils were observed. However, an overall positive effect of the bleaching process on hemp oil was found. The amount of saturated fatty acid (SFA) was reduced by 17.1% compared with the initial value, resulting in an increase in the proportion of polyunsaturated fatty acids (PUFA) by 4.4%, resulting in an unsaturated fatty acid (UFA) proportion of 90%. There was a significant improvement in the SFA/PUFA ratio by 26% over the baseline, and the omega-6/omega-3 ratio by 8.9% to a value of 3.1:1. The new knowledge from this study is evidence of the positive effect of the low-temperature bleaching process on the fatty acid profile. In contrast, the parameters of the bleaching process itself are not significant.
Higher Oxygen Content Affects Rabbit Meat’s Quality and Fatty Acid Profile in a Modified Atmosphere
After 7 days of storage, the quality of the meat packed in both systems (MAP and VAC) was satisfactory; however, after 14 and 21 days, there was a noticeable decline in quality, as evidenced by changes in the water percentage and color parameters (L∗, a∗, and b∗). However, muscles stored in the MAP1 had the highest tenderness. The results indicated that as the storage time increased (up to 21 days), the share of C14:0 (P<0.001) and C16:0 (P<0.001) acids in the fat of the LTL muscles decreased. Only the share of C18:0 (P=0.001) and C20:1 (P=0.015) acids was significantly influenced by the packaging method. The highest iodine level was found in MAP1 21 days after packaging (85.68). The ratio of n-6/n-3, PUFA/SFA, AI, and TI indexes, which indicate a higher nutritional quality of fat, varied only with storage time without being affected by the gas mixture (P>0.05). The H/H level differed significantly with the storage time (P<0.001), with no effect of the gas mixture (P=0.133). After the 21-day storage period, the controlled atmosphere led to an increase in the concentration of MUFA and PUFA and a decrease in SFA, according to the study of the fatty acid profile.
Effect of refining and fractionation processes on minor components, fatty acids, antioxidant and antimicrobial activities of shea butter
Shea butter is becoming increasingly popular in foods, cosmetics and pharmaceutical products. This work aims to study the effect of the refining process on the quality and stability of fractionated and mixed shea butters. Crude shea butter, refined shea stearin, olein and their mixture (1:1 w/w) were analyzed for fatty acids, triacylglycerol composition, peroxide value (PV), free fatty acids (FFA), phenolic (TPC), flavonoid (TFC), unsaponifiable matter (USM), tocopherol and phytosterol content. Additionally, the oxidative stability, radical scavenging activity (RSA), antibacterial and antifungal activities were evaluated. The two main fatty acids in the shea butter samples were stearic and oleic. The refined shea stearin showed lower PV, FFA, USM, TPC, TFC, RSA, tocopherol and sterol content than crude shea butter. A higher EC50 was observed, but antibacterial activity was much lower. The refined olein fraction was characterized by lower PV, FFA and TFC in comparison with crude shea butter, but USM, TPC, RSA, EC50, tocopherol and sterol content was unchanged. The antibacterial activity was higher, but the antifungal activity was lower than those of crude shea butter. When both fractions were mixed, their fatty acid and triacylglycerol composition were similar to those of crude shea butter, but other parameters were different.
Corrigendum to ‘Phytochemical content of roasted seeds of three white mustard (Sinapis alba L.) varieties differing in their glucosinolate and erucic acid content’ [Ind. Crops Prod. 220 (2024) 119207]
Influence of ozone treatment on sensory quality, aroma active compounds, phytosterols and phytosterol oxidation products in stored rapeseed and flaxseed oils
Thermo-oxidative stability and safety of new acylglycerols with stigmasterol residue: Effects of fatty acids saturation and position in the glycerol backbone
DSC phase transition profiles analyzed by control charts to determine markers for the authenticity and deterioration of flaxseed oil during storage
An approach of implementing X-bar and R control charts as a statistical control tool to monitor the changes in the melting profile of fresh and stored flaxseed oils by differential scanning calorimetry (DSC) was used. Phase transition melting profiles were collected after 0, 2, 4, and 6 months of storing flaxseed oils, originating from five different cultivars. Four peaks at around −36, −30, −25, and −12 °C were identified using the deconvolution analysis procedure, which enabled the data to be collected at peak temperature (T), peak height (h), the peak area (A), and the percentages of the area (P A), as well as the ratio calculated from these parameters. Control charts obtained for the second peak of the melting profile showed a significant decrease of peak height (h2) from 0.50 to 0.39 W/g and the percentage of the area (P A2) from 50 to 38%, within the storage time (p ≤ 0.05); thus, they were considered to be indicators of oil deterioration. Strong negative correlations of the unstable parameters of DSC with chemical indicators of the oils’ oxidative stability (PV, p-AV, TOTOX) were found. For DSC parameters, related to the first peak (h1, A1) and the third peak (h3, A3), changes were statistically not significant within storage (p > 0.05); thus, they can be used as markers of flaxseed oil authenticity. The study demonstrated that X-bar and R control charts could effectively monitor changes in the specific peaks and calculated ratios from the DSC melting profile of fresh and stored flaxseed oils, serving as reliable indicators of oil deterioration.
Comprehensive characteristic of lipid fraction as a distinguishing factor of three lupin seed species
The effect of ultrasound-assisted maceration of selected cold-pressed oils with lyophilized mullein flowers (Verbascum thapsus L.) on their oxidative stability and chemical composition
Effect of gastrointestinal digestion on the stability and cytotoxicity of conventional and pegylated liposomes encapsulated with stigmasterol and its esters
Nutritional Quality, Fatty Acids Profile, and Phytochemical Composition of Unconventional Vegetable Oils
Physicochemical characteristics of cold-pressed blackcurrant-, strawberry-, and raspberry seed oils during storage and its influence on thermo-oxidative stability
Assessment of the Quality, Bioactive Compounds, and Antimicrobial Activity of Egyptian, Ethiopian, and Syrian Black Cumin Oils
Background: The oils obtained from the seeds of Nigella sativa, also named black cumin, are rich in bioactive compounds that strengthen immunity and support human health. This study aimed to compare Nigella sativa oils pressed from Egyptian (Eg-NSSO), Ethiopian (Et-NSSO), and Syrian (Sy-NSSO) seeds. Methods: The analyzed oils were obtained from a local company. The content of phenolic compounds, tocochromanols, phytosterols, volatile compounds, triglycerides, and fatty acids composition was determined using chromatographic methods. The oxidative stability was determined by Rancimat technique as well as the determination of DPPH and ABTS scavenging activity. As an assessment of bioactivity, the antimicrobial and anti-aflatoxigenic properties of oils were evaluated. Results: Ethiopian oil had highest content of phenolic compounds, flavonoids, phytosterols, and tocochromanols and was characterized by the longest induction period (IP = 7.89 h). The share of thymoquinone was the highest in Ethiopian oil (34.84%), followed by Egyptian (27.36%), then Syrian (22.59%). Ethiopian oil recorded a high antibacterial activity, while Egyptian oil showed a unique antifungal activity against toxigenic fungi. Aflatoxins’ secretion into liquid medium containing NSSO was reduced, especially with Egyptian oil.
