Filters
Insight into Oil-in-Water Emulsions Stabilized by Cross-Linked and Pregelatinized Starches: The Effect of Molecular Structure, Surface Activity and Proton Molecular Dynamics
Effect of flaxseed oil cake extract on the microbial quality, texture and shelf life of gluten-free bread
Extending the shelf life of gluten-free bread (GFB) is a challenge. Mainly due to the ingredients used and their characteristics, GFB has numerous drawbacks such as unsatisfactory texture and rapid staling beyond a low nutritional value. In the present study, flaxseed oil cake extract (FOCE) was used to replace water (25–100%) in GFB formulations in order to test FOCE’s potential to reduce GFB staling and extend microbial stability. Texture (TPA test), water activity (LF NMR), acidity (pH measurements) and microbiological quality of GFBs were tested. Moreover, the content of a lignan with broad health-promoting potential, secoisolariciresinol diglucoside (SDG), in GFB with FOCE was analyzed. The results showed that the use of FOCE enriched experimental GFB in valuable SDG (217–525 µg/100 g DM) while not causing adverse microbiological changes. A moderate level (25–50%) of FOCE did not change the main texture parameters of GFB stored for 72 h, the quality of which was comparable to control bread without FOCE. Meanwhile, higher proportions of FOCE (75–100% of water replacement) shortened GFB shelf life as determined by water activity and texture profile, suggesting that GFB with FOCE should be consumed fresh. To summarize, FOCE at moderate levels can add value to GFBs without causing a drop in quality, while still fitting in with the idea of zero waste and the circular economy.
Upcycling Potato Juice Protein for Sustainable Plant-Based Gyros: A Multidimensional Quality Assessment
Polymer-Solvent Interactions in Modified Starches Pastes–Electrokinetic, Dynamic Light Scattering, Rheological and Low Field Nuclear Magnetic Resonance Approach
Starch paste is a very complex dispersion that cannot be clearly classified as a solution, colloid or suspension and many factors affects its properties. As these ambiguities constitute a barrier to technological development, the aim of this study was to investigate the interaction of starch macromolecules with water by analysing the results of rheological properties, low field nuclear magnetic resonance (LF NMR), dynamic light scattering (DLS) and ζ potential analyses. Starch pastes with a concentration of 1%, prepared with distilled water and buffered to pH values of 2.5, 7.0 and 9.5 were analysed. It was proved that the pH buffering substantially decreased the values of consistency index but the pH value itself was not significant. LF NMR studies indicated that the dissolution of starch in water resulted in a reduction in spin-lattice as well as spin-spin relaxation times. Moreover, changes in relaxation times followed the patterns observed in rheological studies. Electrokinetic and DLS analyses showed that potential values are primarily influenced by the properties of the starches themselves and, to a lesser extent, by the environmental conditions. The conducted research also showed complementarity and, to some extent, substitutability of the applied research methods as well as exclusion chromatography (a method not used in this work).
Microwaved-Assisted Synthesis of Starch-Based Biopolymer Membranes for Novel Green Electrochemical Energy Storage Devices
The investigated starch biopolymer membrane was found to be a sustainable alternative to currently reported and used separators due to its properties, which were evaluated using physicochemical characterization. The molecular dynamics of the biomembrane were analyzed using low-field nuclear magnetic resonance (LF NMR) as well as Raman and infrared spectroscopy, which proved that the chemical composition of the obtained membrane did not degrade during microwave-assisted polymerization. Easily and cheaply prepared through microwave-assisted polymerization, the starch membrane was successfully used as a biodegradable membrane separating the positive and negative electrodes in electric double-layer capacitors (EDLCs). The obtained results for the electrochemical characterization via cyclic voltammetry (CV), galvanostatic charge with potential limitation (GCPL), and electrochemical impedance spectroscopy (EIS) show a capacitance of 30 F g−1 and a resistance of 2 Ohms; moreover, the longevity of the EDLC during electrochemical floating exceeded more than 200 h or a cyclic ability of 50,000 cycles. Furthermore, due to the flexibility of the membrane, it can be easily used in novel, flexible energy storage systems. This proves that this novel biomembrane can be a significant step toward ecologically friendly energy storage devices and could be considered a cheaper alternative to currently used materials, which cannot easily biodegrade over time in comparison to biopolymers.
Chemical characteristics and thermal oxidative stability of novel cold-pressed oil blends: GC, LF NMR, and DSC studies
Plant oils contain a high content of unsaturated fatty acids. Studies of food products have revealed a considerable disproportion in the ratio of ω6 to ω3. This article presents information on the healthful qualities of eight new oil blends that contain a beneficial proportion of ω6 to ω3 fatty acids (5:1), as well as their degradation during heating at 170 and 200 °C. The fatty acid profile was analyzed by gas chromatography (GC), content of polar compounds and polymers of triacylglycerols by liquid chromatography (LC), water content was measured by the Karl Fischer method, and oxidative stability was measured by differential scanning calorimetry (DSC) and low-field nuclear magnetic resonance (LF NMR) methods. The results showed that during heating, the polar fraction content increased in samples heated at both analyzed temperatures compared to unheated oils. This was mainly due to the polymerization of triacylglycerols forming dimers. In some samples that were heated, particularly those heated to 200 °C, trimers were detected, however, even with the changes that were observed, the polar fraction content of the blends did not go beyond the limit. Despite the high content of unsaturated fatty acids, the analyzed blends of oils are characterized by high oxidative stability, confirmed by thermoanalytical and nuclear magnetic resonance methods. The high nutritional value as well as the oxidative stability of the developed oil blends allow them to be used in the production of food, in particular products that ensure an adequate supply of ω3 fatty acids.
Gluten-Free Bread Enriched with Potato and Cricket Powder: Comparative Study of the Effects of Protein on Physicochemical Properties Bonds and Molecular Interactions
The increasing demand for diverse foods and tailored nutrition encourages the development of innovative products, such as bread enriched with cricket powder (CP) or potato protein (PP). This study presents the preparation and analysis of gluten-free breads with CP and PP, focusing on their nutritional value and physical properties. Analytical methods included water activity measurement, bread volume, crumb color analysis, FTIR spectroscopy, low-field NMR relaxometry, and texture profile analysis. Ash content ranged from 0.60 ± 0.03% to 1.16 ± 0.11%, and caloric values ranged from 216.2 to 229.5 kcal/100 g. Water activity remained stable across all samples (0.975–0.976). Crumb color analysis showed the greatest change in CP samples (ΔE = 14.07), while PP had minimal impact (ΔE = 2.15). FTIR spectra revealed increased amide I and II bands, indicating higher protein content. NMR results demonstrated shorter T1, T21, and T22 times for CP, suggesting reduced water mobility and a denser structure, while PP samples showed higher values, indicating a looser, more hydrated matrix. Texture analysis confirmed that CP increased firmness and compactness, whereas PP enhanced springiness. These findings suggest that CP and PP can improve the nutritional and structural properties of gluten-free bread, offering valuable alternatives for modern dietary needs.
Comparison of technological and physicochemical properties of cricket powders of different origin
Despite the widely described high nutritional value of insects, many authors suggest significant differences in the nutrient content depending on the breeding conditions, preparation methods, or even geographical origin. To date, there is no reports on the technological and physical properties of cricket powder (CP). This article describes the properties of 3 CPs of various geographic origins. The oil-absorption, water-binding, foaming capacities and foam stability were analysed. Thermal changes by DSC, water behaviour by LF-NMR and FTIR analysis were performed as well. On the obtained results, it was found that all analysed cricket powders were characterized by a high content of protein and fat. The geographical origin did not affect oil absorption, while the differences were recorded for water-binding. No foaming properties were observed in any of CPs. Thermal analysis showed the beginning of protein degradation at temperatures above 110 °C. Despite the differences in the water behaviour of dry CPs, no significant changes in hydrated CPs were observed. On the basis of the obtained results, it was found that the geographic origin of cricket powder will not affect the differences in technological properties, and thus the application of CP as an additive increasing the nutritional value can be widely used.
The Rheology, Texture, and Molecular Dynamics of Plant-Based Hot Dogs
The rising demand for plant-based alternatives to traditional meat products has led to the development of plant-based sausages (PBSs) that closely mimic the texture and taste of their meat counterparts. This study investigates the rheological and textural properties, as well as proton molecular dynamics, of hot dog-type PBSs and batters used in their production. Various formulations were analyzed to understand how different ingredients and processing methods affect the characteristics of the final products. Our findings reveal that the incorporation of specific plant proteins and hydrocolloids significantly influences the rheological behavior and texture profile of sausages. The hardness of the samples ranged from 4.33 to 5.09 N/mm and was generally higher for the products with inorganic iron sources. Regarding the viscoelastic properties, all the samples showed larger values of the storage modulus than the loss modulus, which indicates their solid-like behavior. Additionally, the study utilized advanced proton nuclear magnetic resonance (NMR) techniques to elucidate the molecular dynamics within plant-based matrices, providing insights into water distribution and mobility. Key findings highlight the impact of different plant proteins and additives on the texture and stability of sausage analogs.
Molecular Properties of Starch-Water Interactions in the Presence of Bioactive Compounds from Barley and Buckwheat-LF NMR Preliminary Study
Thermogravimetric (TG/DTG) characterization of cold-pressed oil blends and Saccharomyces cerevisiae-based microcapsules obtained with them
Abstract The aim of this study was to develop yeast-based microcapsules (YBMCs) containing vegetable oil blends with n3/n6 fatty acids in a ratio of 5:1. The oil blends, as well as YBMCs with these oils, were analyzed in nitrogen and oxygen. The shape and course of the TG and DTG curves were observed for yeast cells with all types of oil blends. No differences were observed in shape because of the microencapsulation curves with all oil blends between YMBCs prepared using native and autolyzed yeast. The results show that the yeast cells could be used as efficient microcarriers for the encapsulation of cold-pressed oils in order to provide thermal stable ingredients for the food industry.
Pasta with Kiwiberry (Actinidia arguta): Effect on Structure, Quality, Consumer Acceptance, and Changes in Bioactivity during Thermal Treatment
In this study, kiwiberry lyophilizate (KBL) was incorporated into pasta at different levels (5%, 10%, and 15% w/w). Kiwiberry fruits’ characteristics (ascorbic acid, carotenoids, phenolic compounds, and antioxidant activity determination) as well as physical (cooking properties, color, microscopic structure determination, texture, and water molecular dynamics analysis by low-field NMR) and chemical analyses (proximate composition phenolic compounds composition and antioxidant activity) of KBL-enriched pasta were investigated. The replacement of semolina with KBL in the production of pasta significantly changed its culinary properties. Results showed that the addition of KBL leads to a reduction in optimal cooking time and cooking weight (47.6% and 37.3%, respectively). Additionally, a significant effect of the KBL incorporation on the color of both fresh and cooked pasta was observed. A significant reduction in the L* value for fresh (27.8%) and cooked (20.2%) pasta was found. The KBL-enriched pasta had a different surface microstructure than the control pasta and reduced firmness (on average 44.7%). Low-field NMR results have confirmed that the ingredients in kiwiberry fruit can bind the water available in fresh pasta. The heat treatment resulted in increasing the availability of phenolic compounds and the antioxidant activity (64.7%) of cooked pasta. Sensory evaluation scores showed that the use of 5–10% of the KBL additive could be successfully accepted by consumers.
Sustainable Protein Fortification: Impact of Hemp and Cricket Powder on Extruded Snack Quality
This research paper evaluates the functional and nutritional properties of extruded corn snacks fortified with plant-based hemp protein (HP) and insect-derived cricket powder (CP). With a focus on sustainable protein sources due to growing environmental concerns and the need for alternative protein sources, this study aims to enhance the nutritional profile of corn snacks. The incorporation of unconventional proteins into snacks is explored to meet consumer demands for sustainable and nutritious options. Results show that HP-enriched snacks have higher mineral content, such as calcium and magnesium, lower sodium content, and improved water interaction profiles. On the other hand, CP-fortified snacks exhibit higher protein content, essential amino acids, and moisture retention capabilities. Texture analysis reveals differences in hardness, cohesiveness, and springiness between HP and CP-enriched products. Moreover, color analysis indicates that HP and CP additives influence the color and appearance of the snacks, with CP enrichments leading to darker snacks. Sorption isotherm studies demonstrate varying hygroscopicity levels between HP- and CP-enriched samples, impacting their storage stability. Surface structure assessments show differences in the specific sorption surface area, suggesting unique properties attributed to each protein source. In conclusion, both hemp protein and cricket powder offer various advantages for snack fortification, providing opportunities to enhance nutritional profiles while addressing sustainability concerns.
An instrumental analysis of changes in the physicochemical and mechanical properties of smoked and mould salamis during storage
Exploring the impact of dietary fiber enrichment on molecular water properties and indicators of Maillard reaction (furosine, Nε-carboxymethyllysine, and Nε-carboxyethyllysine) in model gluten-free bread
Insight into the Gluten-Free Dough and Bread Properties Obtained from Extruded Rice Flour: Physicochemical, Mechanical, and Molecular Studies
The present study aimed to evaluate the effect of the extrusion process and particle size on the properties of rice flour (microstructure, pasting properties), gluten-free dough (rheological properties), and bread (texture, specific volume, water absorption capacity, low-field nuclear magnetic resonance (LF NMR) relaxometry). Rice flours were extruded at 80 and 120 °C with feed moisture (15 and 30%) and with the same particle size (<132 and >132–200 µm). Significant differences were observed between the pasting profiles of the flours before and after extrusion. The pasting profile of extruded flours confirmed that hydrothermal treatment partially gelatinized the starch, decreasing the viscosity during heating. The water binding properties increased with the extrusion temperature and moisture content and also with the particle size of the flour. The most important parameter influencing the mechanical properties of the dough was the moisture content of the flour and significant differences were observed between fine (<132 μm) and coarse flours (>132–200 μm). The molecular dynamics of particles containing protons in the bound and bulk fractions in each sample do not depend on the extruder parameters or granulation of the obtained fraction. LF NMR results confirmed that extrusion of rice flour led to a significant decrease in the T21 value compared to the control sample and an increase in the T22 value in breads made with flours with particle size <132 μm. A linear relationship was found between the spin-spin relaxation times (T1) changes and the equilibrium water activity (ar). The results showed that bread with extruded rice flour at the same die temperature resulted in a significantly higher bread volume (31%) and lower hardness (27%) compared to the control. The highest hardness was observed in the case of samples prepared with extruded flour with the addition of 15% moisture, regardless of temperature and particle size.
